Natural gas (also gas, methane gas or fossil gas) is a fossil fuel, naturally occurring in geological formations. Typically, the gas is a mix of gaseous hydrocarbons, primarily methane (95%), small amounts of higher alkanes, and traces of carbon dioxide and nitrogen, hydrogen sulfide and helium. Methane is a colorless and odorless gas, and, after carbon dioxide, is the second-greatest greenhouse gas that contributes to global climate change. Because natural gas is odorless, a commercial odorizer, such as methanethiol, that smells of hydrogen sulfide (rotten eggs) is added to the gas for the ready detection of gas leaks.
Natural gas is a fossil fuel that is formed when layers of organic matter (primarily marine microorganisms) are thermally decomposed under oxygen-free conditions, subjected to intense heat and pressure underground over millions of years. The energy that the decayed organisms originally obtained from the sun via photosynthesis is stored as chemical energy within the molecules of methane and other hydrocarbons. Most natural gas is collected from underground geological formations, often alongside other fossil fuels like coal and oil (petroleum). Natural gas is often a byproduct of petroleum production, where it can either be vented without burning, flared (burned off) or collected.
The extraction and consumption of natural gas is a major industry. According to a 2025 IEA report, demand has increased in recent years. When burned for heat or electricity, natural gas emits fewer toxic air pollutants, less carbon dioxide, and almost no particulate matter compared to other fossil fuels. However, the natural gas industry is one of the largest drivers of climate change: gas venting and unintended fugitive emissions throughout the supply chain can result in natural gas having a similar or greater carbon footprint to other fossil fuels overall. Much of this is driven by methane's greater effect on radiative forcing. Globally, new installed natural gas infrastructure is one of the largest sources of increased greenhouse gas emissions for energy production. To meet climate goals, 2023 IPCC Sixth Assessment report concluded that new fossil gas infrastructure is only suitable under very specific conditions with carbon capture and fugitive gas prevention technologies, otherwise it risks emissions overshoot or becoming stranded assets.
Before natural gas can be burned as a fuel or used in manufacturing processes, it almost always has to be processed to remove impurities such as water. The byproducts of this processing include ethane, propane, butanes, pentanes, and higher molecular weight hydrocarbons. Hydrogen sulfide (which may be converted into pure sulfur), carbon dioxide, water vapor, and sometimes helium and nitrogen must also be removed. While natural gas is frequently transported in a gaseous state in gas pipelines, inter-country transportation and long-term storage of natural gas was not widely available until the widespread adoption of liquefied natural gas.
Natural gas is measured in standard cubic meters or standard cubic feet. The density compared to air ranges from 0.58 (16.8 g/mole, 0.71 kg per standard cubic meter) to as high as 0.79 (22.9 g/mole, 0.97 kg per scm), but generally less than 0.64 (18.5 g/mole, 0.78 kg per scm). For comparison, pure methane (16.0425 g/mole) has a density 0.5539 times that of air (0.678 kg per standard cubic meter).
Name
In the early 1800s, natural gas became known as "natural" to distinguish it from the dominant gas fuel at the time, coal gas. Unlike coal gas, which is manufactured by heating coal, natural gas can be extracted from the ground in its native gaseous form. When the use of natural gas overtook the use of coal gas in English-speaking countries in the 20th century, it was increasingly referred to as simply "gas". However, it is not to be confused with gasoline, which is also shortened in colloquial usage to "gas", especially in North America.
In order to highlight its role in exacerbating the climate crisis, however, many organizations have criticized the continued use of the word "natural" in referring to the gas. These advocates prefer the term "fossil gas" or "methane gas" as better conveying to the public its climate threat. A 2020 study of Americans' perceptions of the fuel found that, across political identifications, the term "methane gas" led to better estimates of its harms and risks.
History
Natural gas can come out of the ground and cause a long-burning fire. In ancient Greece, the gas flames at Mount Chimaera contributed to the legend of the fire-breathing creature Chimera. In ancient China, gas resulting from the drilling for brines was first used by about 400 BC. The Chinese transported gas seeping from the ground in crude pipelines of bamboo to where it was used to boil salt water to extract the salt in the Ziliujing District of Sichuan.
Natural gas was not widely used before the development of long distance pipelines in the early 20th century. Before that, most use was near to the source of the well, and the predominant gas for fuel and lighting during the industrial revolution was manufactured coal gas.
The history of natural gas in the United States begins with localized use. In the seventeenth century, French missionaries witnessed the American Indians setting fire to natural gas seeps around Lake Erie, and scattered observations of these seeps were made by European-descended settlers throughout the eastern seaboard through the 1700s. In 1821, William Hart dug the first commercial natural gas well in the United States at Fredonia, New York, United States, which led in 1858 to the formation of the Fredonia Gas Light Company. Further such ventures followed near wells in other states, until technological innovations allowed the growth of major long distance pipelines from the 1920s onwards.
By 2010, 66,000 km3 (16,000 mi3) (or 8%) had been used out of the total 850,000 km3 (200,000 mi3) of estimated remaining recoverable reserves of natural gas.
Processing
The image below is a schematic block flow diagram of a typical natural gas processing plant. It shows the various unit processes used to convert raw natural gas into sales gas pipelined to the end user markets.
The block flow diagram also shows how processing of the raw natural gas yields byproduct sulfur, byproduct ethane, and natural gas liquids (NGL) propane, butanes and natural gasoline (denoted as pentanes +).
Demand
As of mid-2020, natural gas production in the US had peaked three times, with current levels exceeding both previous peaks. It reached 24.1 trillion cubic feet per year in 1973, followed by a decline, and reached 24.5 trillion cubic feet in 2001. After a brief drop, withdrawals increased nearly every year since 2006 (owing to the shale gas boom), with 2017 production at 33.4 trillion cubic feet and 2019 production at 40.7 trillion cubic feet. After the third peak in December 2019, extraction continued to fall from March onward due to decreased demand caused by the COVID-19 pandemic in the US.
The 2021 global energy crisis was driven by a global surge in demand as the world quit the economic recession caused by COVID-19, particularly due to strong energy demand in Asia.
Storage and transport
Due to its low density, it is not easy to store natural gas or to transport it by vehicle. Natural gas pipelines are impractical across oceans, since the gas needs to be cooled down and compressed, as the friction in the pipeline causes the gas to heat up. Many existing pipelines in the US are close to reaching their capacity, prompting some politicians representing northern states to speak of potential shortages. The large trade cost implies that natural gas markets are globally much less integrated, causing significant price differences across countries. In Western Europe, the gas pipeline network is already dense. New pipelines are planned or under construction between Western Europe and the Near East or Northern Africa.
Whenever gas is bought or sold at custody transfer points, rules and agreements are made regarding the gas quality. These may include the maximum allowable concentration of CO2, H2S and H2O. Usually sales quality gas that has been treated to remove contamination is traded on a "dry gas" basis and is required to be commercially free from objectionable odours, materials, and dust or other solid or liquid matter, waxes, gums and gum forming constituents, which might damage or adversely affect operation of equipment downstream of the custody transfer point.
Based on their geographic origin, H-gas (high-calorific gas) and L-gas (low-calorific gas) are to be distinguished. Both types require separate transport, leading to two separate pipeline networks, e.g. in parts of Germany (with a strengthened focus and transition towards H-gas, as the L-gas reservoirs in Germany and the Netherlands are declining).
Compressed Natural gas
CNG is transported at high pressure, typically above 200 bars (20,000 kPa; 2,900 psi). Compressors and decompression equipment are less capital intensive and may be economical in smaller unit sizes than liquefaction/regasification plants. Natural gas trucks and carriers may transport natural gas directly to end-users, or to distribution points such as pipelines.
Flaring
In the past, the natural gas which was recovered in the course of recovering petroleum could not be profitably sold, and was simply burned at the oil field in a process known as flaring. Flaring is now illegal in many countries. Additionally, higher demand in the last 20–30 years has made production of gas associated with oil economically viable. As a further option, the gas is now sometimes re-injected into the formation for enhanced oil recovery by pressure maintenance as well as miscible or immiscible flooding. Conservation, re-injection, or flaring of natural gas associated with oil is primarily dependent on proximity to markets (pipelines), and regulatory restrictions.
Natural gas can be indirectly exported through the absorption in other physical output. The expansion of shale gas production in the US has caused prices to drop relative to other countries. This has caused a boom in energy intensive manufacturing sector exports, whereby the average dollar unit of US manufacturing exports has almost tripled its energy content between 1996 and 2012.
A "master gas system" was invented in Saudi Arabia in the late 1970s, ending any necessity for flaring. Satellite and nearby infra-red camera observations, however, shows that flaring and venting are still happening in some countries.
Similarly, some landfills that also discharge methane gases have been set up to capture the methane and generate electricity.
Salt domes and underground storage
Natural gas is often stored underground [references about geological storage needed]inside depleted gas reservoirs from previous gas wells, salt domes, or in tanks as liquefied natural gas. The gas is injected in a time of low demand and extracted when demand picks up. Storage nearby end users helps to meet volatile demands, but such storage may not always be practicable.
Floating liquefied natural gas
Floating liquefied natural gas (FLNG) is an innovative technology designed to enable the development of offshore gas resources that would otherwise remain untapped due to environmental or economic factors which currently make them impractical to develop via a land-based LNG operation. FLNG technology also provides a number of environmental and economic advantages:
Environmental – Because all processing is done at the gas field, there is no requirement for long pipelines to shore, compression units to pump the gas to shore, dredging and jetty construction, and onshore construction of an LNG processing plant, which significantly reduces the environmental footprint. Avoiding construction also helps preserve marine and coastal environments. In addition, environmental disturbance will be minimised during decommissioning because the facility can easily be disconnected and removed before being refurbished and re-deployed elsewhere.
Economic – Where pumping gas to shore can be prohibitively expensive, FLNG makes development economically viable. As a result, it will open up new business opportunities for countries to develop offshore gas fields that would otherwise remain stranded, such as those offshore East Africa.
Many gas and oil companies are considering the economic and environmental benefits of floating liquefied natural gas (FLNG). There are currently projects underway to construct five FLNG facilities. Petronas is close to completion on their FLNG-1 at Daewoo Shipbuilding and Marine Engineering and are underway on their FLNG-2 project at Samsung Heavy Industries. Shell Prelude is due to start production 2017. The Browse LNG project will commence FEED in 2019.
Uses
Natural gas is primarily used in the northern hemisphere. North America and Europe are major consumers.
Well-head gases often require removal of various hydrocarbon molecules contained within the gas. Some of these gases include heptane, pentane, propane and other hydrocarbons with molecular weights above methane (CH4). The natural gas transmission lines extend to the natural gas processing plant or unit which removes the higher-molecular weight hydrocarbons to produce natural gas with energy content between 35–39 megajoules per cubic metre (950–1,050 British thermal units per cubic foot). The processed natural gas may then be used for residential, commercial and industrial uses.
Mid-stream natural gas
Natural gas flowing in the distribution lines is called mid-stream natural gas and is often used to power engines which rotate compressors. These compressors are required in the transmission line to pressurize and repressurize the mid-stream natural gas as the gas travels. Typically, natural gas powered engines require 35–39 MJ/m3 (950–1,050 BTU/ft3) natural gas to operate at the rotational name plate specifications. Several methods are used to remove these higher molecular weighted gases for use by the natural gas engine. A few technologies are as follows:
Joule–Thomson skid
Cryogenic or chiller system
Chemical enzymology system
Domestic use
In the US, over one-third of households (>40 million homes) cook with gas. Natural gas dispensed in a residential setting can generate temperatures in excess of 1,100 °C (2,000 °F) making it a powerful domestic cooking and heating fuel. Stanford scientists estimated that gas stoves emit 0.8–1.3% of the gas they use as unburned methane and that total U.S. stove emissions are 28.1 gigagrams of methane. In much of the developed world it is supplied through pipes to homes, where it is used for many purposes including ranges and ovens, heating/cooling, outdoor and portable grills, and central heating. Heaters in homes and other buildings may include boilers, furnaces, and water heaters. Both North America and Europe are major consumers of natural gas.
Domestic appliances, furnaces, and boilers use low pressure, usually with a standard pressure around 1.7 kilopascals (0.25 psi) over atmospheric pressure. The pressures in the supply lines vary, either the standard utilization pressure (UP) mentioned above or elevated pressure (EP), which may be anywhere from 7 to 800 kilopascals (1 to 120 psi) over atmospheric pressure. Systems using EP have a regulator at the service entrance to step down to UP.
Natural gas piping systems inside buildings are often designed with pressures of 14 to 34 kilopascals (2 to 5 psi), and have downstream pressure regulators to reduce pressure as needed. In the United States the maximum allowable operating pressure for natural gas piping systems within a building is based on NFPA 54: National Fuel Gas Code, except when approved by the Public Safety Authority or when insurance companies have more stringent requirements.
Generally, natural gas system pressures are not allowed to exceed 5 psi (34 kPa) unless all of the following conditions are met:
The AHJ will allow a higher pressure.
The distribution pipe is welded. (Note: 2. Some jurisdictions may also require that welded joints be radiographed to verify continuity).
The pipes are closed for protection and placed in a ventilated area that does not allow gas accumulation.
The pipe is installed in the areas used for industrial processes, research, storage or mechanical equipment rooms.
Generally, a maximum liquefied petroleum gas pressure of 20 psi (140 kPa) is allowed, provided the building is constructed in accordance with NFPA 58: Liquefied Petroleum Gas Code, Chapter 7.
A seismic earthquake valve operating at a pressure of 55 psig (3.7 bar) can stop the flow of natural gas into the site wide natural gas distribution piping network (that runs outdoors underground, above building roofs, and/or within the upper supports of a canopy roof). Seismic earthquake valves are designed for use at a maximum of 60 psig.
In Australia, natural gas is transported from gas processing facilities to regulator stations via transmission pipelines. Gas is then regulated down to distributed pressures and the gas is distributed around a gas network via gas mains. Small branches from the network, called services, connect individual domestic dwellings, or multi-dwelling buildings to the network. The networks typically range in pressures from 7 kPa (low pressure) to 515 kPa (high pressure). Gas is then regulated down to 1.1 kPa or 2.75 kPa, before being metered and passed to the consumer for domestic use. Natural gas mains are made from a variety of materials: historically cast iron, though more modern mains are made from steel or polyethylene.
In some states in the USA, natural gas can be supplied by independent natural gas wholesalers/suppliers using existing pipeline owners' infrastructure through Natural Gas Choice programs.
LPG (liquefied petroleum gas) typically fuels outdoor and portable grills. Although, compressed natural gas (CNG) is sparsely available for similar applications in the US in rural areas underserved by the existing pipeline system and distribution network of the less expensive and more abundant LPG (liquefied petroleum gas).
Transportation
CNG is a cleaner and also cheaper alternative to other automobile fuels such as gasoline (petrol). By the end of 2014, there were over 20 million natural gas vehicles worldwide, led by Iran (3.5 million), China (3.3 million), Pakistan (2.8 million), Argentina (2.5 million), India (1.8 million), and Brazil (1.8 million). The energy efficiency is generally equal to that of gasoline engines, but lower compared with modern diesel engines. Gasoline/petrol vehicles converted to run on natural gas suffer because of the low compression ratio of their engines, resulting in a cropping of delivered power while running on natural gas (10–15%). CNG-specific engines, however, use a higher compression ratio due to this fuel's higher octane number of 120–130.
Besides use in road vehicles, CNG can also be used in aircraft. Compressed natural gas has been used in some aircraft like the Aviat Aircraft Husky 200 CNG and the Chromarat VX-1 KittyHawk
LNG is also being used in aircraft. Russian aircraft manufacturer Tupolev for instance is running a development program to produce LNG- and hydrogen-powered aircraft. The program has been running since the mid-1970s, and seeks to develop LNG and hydrogen variants of the Tu-204 and Tu-334 passenger aircraft, and also the Tu-330 cargo aircraft. Depending on the current market price for jet fuel and LNG, the consumption cost advantage for LNG-powered aircraft is approximately 18.96%, along with a 53.72% reduction to carbon monoxide, hydrocarbon and nitrogen oxide emissions.
The advantages of liquid methane as a jet engine fuel are that it has more specific energy than the standard kerosene mixes do and that its low temperature can help cool the air which the engine compresses for greater volumetric efficiency, in effect replacing an intercooler. Alternatively, it can be used to lower the temperature of the exhaust.
Fertilizers
Natural gas is a major feedstock for the production of ammonia, via the Haber process, for use in fertilizer production. The development of synthetic nitrogen fertilizer has significantly supported global population growth — it has been estimated that almost half the people on the Earth are currently fed as a result of synthetic nitrogen fertilizer use.
Hydrogen
Natural gas can be used to produce hydrogen, with one common method being the hydrogen reformer. Hydrogen has many applications: it is a primary feedstock for the chemical industry, a hydrogenating agent, an important commodity for oil refineries, and the fuel source in hydrogen vehicles.
Animal and fish feed
Protein rich animal and fish feed is produced by feeding natural gas to Methylococcus capsulatus bacteria on commercial scale.
Olefins(alkenes)
Natural gas components(alkanes) can be converted into olefins(alkenes) or other chemical synthesis. Ethane by oxidative dehydrogenation converts to ethylene, which can be further converted to ethylene oxide, ethylene glycol, acetaldehyde or other olefins. Propane by oxidative hydrogenation converts to propylene or can be oxidized to acrylic acid and acrylonitrile.
Other
Natural gas is also used in the manufacture of fabrics, glass, steel, plastics, paint, synthetic oil, and other products.
Fuel for industrial heating and desiccation processes.
Raw material for large-scale fuel production using gas-to-liquid (GTL) process (e.g. to produce sulphur-and aromatic-free diesel with low-emission combustion).
Health effects
Cooking with natural gas contributes to poor indoor air quality and can lead to severe respiratory diseases such as asthma.
Environmental effects
Greenhouse effect and natural gas release
Natural gas is a growing contributor to climate change. Both the gas itself (specifically methane) and carbon dioxide, which is released when natural gas is burned, are greenhouse gases. Human activity is responsible for about 60% of all methane emissions and for most of the resulting increase in atmospheric methane. Natural gas is intentionally released or is otherwise known to leak during the extraction, storage, transportation, and distribution of fossil fuels. Globally, methane accounts for an estimated 33% of anthropogenic greenhouse gas warming. The decomposition of municipal solid waste (a source of landfill gas) and wastewater account for an additional 18% of such emissions. These estimates include substantial uncertainties which should be reduced in the near future with improved satellite measurements, such as those planned for MethaneSAT.
After release to the atmosphere, methane is removed by gradual oxidation to carbon dioxide and water by hydroxyl radicals (OH−) formed in the troposphere or stratosphere, giving the overall chemical reaction CH4 + 2O2 → CO2 + 2H2O. While the lifetime of atmospheric methane is relatively short when compared to carbon dioxide, with a half-life of about seven years, it is more efficient at trapping heat in the atmosphere, so that a given quantity of methane has 84 times the global-warming potential of carbon dioxide over a 20-year period and 28 times over a 100-year period. Natural gas is thus a potent greenhouse gas due to the strong radiative forcing of methane in the short term, and the continuing effects of carbon dioxide in the longer term.
Targeted efforts to reduce warming quickly by reducing anthropogenic methane emissions is a climate change mitigation strategy supported by the Global Methane Initiative.
Greenhouse gas emissions
When refined and burned, natural gas can produce 25–30% less carbon dioxide per joule delivered than oil, and 40–45% less than coal. It can also produce potentially fewer toxic pollutants than other hydrocarbon fuels. However, compared to other major fossil fuels, natural gas causes more emissions in relative terms during the production and transportation of the fuel, meaning that the life cycle greenhouse gas emissions are about 50% higher than the direct emissions from the site of consumption. Some policy contexts include gas as a "bridge fuel" based on the mistaken assumption that lower emissions at burning means lower overall environmental impact.
In terms of the warming effect over 100 years, natural gas production and use comprises about one fifth of human greenhouse gas emissions, and this contribution is growing rapidly. Globally, natural gas use emitted about 7.8 billion tons of CO2 in 2020 (including flaring), while coal and oil use emitted 14.4 and 12 billion tons, respectively. The IEA estimates the energy sector (oil, natural gas, coal and bioenergy) to be responsible for about 40% of human methane emissions. According to the IPCC Sixth Assessment Report, natural gas consumption grew 15% between 2015 and 2019, compared to a 5% increase in oil and oil product consumption.
The continued financing and construction of new gas pipelines indicates that huge emissions of fossil greenhouse gases could be locked-in for 40 to 50 years into the future. In the U.S. state of Texas alone, five new long-distance gas pipelines have been under construction, with the first entering service in 2019, and the others scheduled to come online during 2020–2022.
Installation bans
To reduce its greenhouse emissions, the Netherlands is subsidizing a transition away from natural gas for all homes in the country by 2050. In Amsterdam, no new residential gas accounts have been allowed since 2018, and all homes in the city are expected to be converted by 2040 to use the excess heat from adjacent industrial buildings and operations.
Some cities in the United States have started prohibiting gas hookups for new houses, with state laws passed and under consideration to either require electrification or prohibit local requirements. New gas appliance hookups are banned in New York State and the Australian Capital Territory. Additionally, the state of Victoria in Australia has implemented a ban on new natural gas hookups starting from January 1, 2024, as part of its gas substitution roadmap. This followed campaigning which resulted in a prohibition on onshore gas exploration and production in Victoria in 2014. This was partially lifted in 2021 but a constitutional ban remains on fracking.
The UK government is also experimenting with alternative home heating technologies to meet its climate goals. To preserve their businesses, natural gas utilities in the United States have been lobbying for laws preventing local electrification ordinances, and are promoting renewable natural gas and hydrogen fuel.